Timeguard LUNA 111 top2 User Manual

Assembly andoperating instructionsDigital twilight switch LUNA LUNA 111 top2 LUNA 112 top2 111 0 100, 111 0 200112 0 100, 112 0 200LUNA 111 top2 LUNA

Manual and permanentswitchingManual and permanent switching can be setusing the menu in MANUAL or (in the auto-matic screen) by key combination (see p

* red LED flasheson the sensorAllocate sensorsThe SENSORS are allocated in the menuunder OPTIONS. Press MENU (see picture).Connection options:1 LUN

OPTIONSSENSORSExternal outputThe EXTERNAL OUTPUT is set via the menuin OPTIONS (see picture).* Use key without glow lamp.OPERATINGHOURS METEREXTERNALO

OBELISK top2 memory cardUse memory cardInsert memory card in device. Requestdata, read into/from device or start Obelisk program.OBELISK top2 memo

Technical dataNominal voltage: 230–240 V~ (LUNA 111 top2)100–240 V~ (LUNA 112 top2 ),+10 %/-15 %Frequency: 50–60 HzBrightness range: 1–99,000 lx On/of

2ContentsBasic safety instructions 3Screen and keys/operating instructions 4Overview of menu selection 5Connection/installation 6Connection/installati

3Basic safety instructions• The device corresponds to EN 60669-2-1; it is designed for installation on DIN top hat rails (in accordance with EN 50022)

4Screen and keys Operating instructions06121824messwert lx18Lux value displayText lineSunrise/sunset displayChannel status C1, C2ON OFF  MENU– Acti

Overview of menu selectionREADINGC118lxLIGHTCHANNEL C1LUX VALUESDELAYENDMENUMANUAL OPTIONSENDCHANNEL C1SENSORSPERMANENTONPERMANENTOFFMANUAL ONTIMEROPE

6Connection/installationConnect cable Strip cable by 8 mm (max. 9). Insert cable at 45° in the open terminal (2 cables per terminal is possible). P

7GBConnection/installation of light sensor Take length of connection cable into account:max. 100 m (2 x 1.5 mm2), max. 50 m (2 x 0.75 mm2) Avoid run

8Initial start-upSet language, channel and measured valueThe device is preset at 15 lx for switch on/switch offlevel. Press required key and display

Set lux values Press MENU (see picture).Set delay Press MENU (see picture).An on/off delay of 1 minute is preset toavoid faulty operation caused by