Timeguard NCFW150C User Manual download pdf

Fig. 1

Wiring Box (cover removal)

Fig. 2

Wiring Box (cover removed)

To Lamp

Yellow/Green

Blue

Brown

Wiring partially erased

exposing raised

lettering at bottom

of wiring box

To Supply

via Internal

Switch

Cable

Gland

Cable

Clamp

Halogen Floodlight 150 Watts

Catalogue Numbers: NCFB150C – Black NCFW150C – White

Installation Instructions

Please read all instructions before proceeding with the installation.

Please keep these instructions somewhere safe, you may need to refer to them at a later date.

IMPORTANT: Must be installed by a competent person.

Warnings

• Lightingloadmustnotexceed150watts.

• Ensuretheswitchandthemainswitchboardareturnedoffprior

 tomakingwiringconnections,orinserting/replacingthebulb.

• Thelightanditsfixturebecomeextremelyhotwheninuse.Do

 nottouchthebulborfixturewithyourhands.Useacleantissue

or cloth when handling the bulb at all times to avoid

 contaminationofthebulb’sglasssurface.

• Donotinstallnearflammableobjects.

• Mountthefloodlightinapositionthatgivesthefollowing

 clearancesfromadjacentsurface:-

 abovethefloodlight–0.5m,eithersideofthefloodlight–0.3m,

 infrontofthefloodlight–1.0m.

• Donotattempttoreplacethebulboradjusttheangleoffixture

until the floodlights power supply has been disconnected and it

has had time to cool down

• Mustbewiredtoa230voltACpowersource.

Wiring Instructions

1. ThisHalogenFloodlighthasthreewires:

 Brown–LiveBlue–NeutralGreen/Yellow–Earth

 Connectthesewirestothe230voltACpowersupplyvia

 aninternalswitch.

2. ToremovewiringboxcoverrefertoFig.1.

3. RefertoFig.2forwiringconnections.

4. EnsuretheGreen/Yellowwireisconnectedtoearththefloodlight.

5. Doublechecktheconnectionsforpositionandtightnessafter

 wiring.Fixwiringboxcoverandscrewdownfirmlyfora

 waterproofseal.

6. Finallytightenthecableclampinthewiringboxthen

the cable gland on the outside of the wiring box to seal

 offthesupplycableentry.

Foraproductbrochurepleasecontact:

Timeguard Ltd. VictoryPark,400EdgwareRoad,LondonNW26NDTel:020-8452-1112

oremail[email protected]

67.058.319(Iss.2)

AGroupcompany

The lamp supplied is a class C (high

efficiency)unitof100Wpower

consumption giving a similar light output

tothelowerefficiency150Wunits

previouslyinuse.ThelamphasR7Scaps.

Warning:

When in use the bulb and the

floodlightbecomeextremelyhot.Do

not touch the bulb or floodlight with

yourbarehands.Useacleantissueor

cloth when handling the bulb at all

times (excretions from hands can

contaminate the bulb surface and

seriously reduce bulb life).

Caution: do not install near flammable objects as floodlight becomes extremely hot when in use. Do not attempt to replace

the bulb or adjust the angle of the floodlight until the units power supply has been disconnected and it has cooled down.

For assistance with the product please contact the HELPLINE on 020 8450 0515 or email [email protected]

3 Year Guarantee

In the unlikely event of this product becoming faulty due to defective material

ormanufacturewithin3yearsofthedateofpurchase,pleasereturnittoyour

supplier in the first year with proof of purchase and it will be replaced free of

charge.Foryears2and3oranydifficultyinthefirstyeartelephonethe

helpline on

020 8450 0515.

Using lamp supplied

How to Replace Bulb

1. Removescrewlocatedatthetopofthefloodlightandswing

 glassandframedowntoexposethebulbholder.

2. Ensurebothbulbholdersocketsareclean.

3. Insertoneendofbulbintoonespringloadedsocketandthe

 gentlyinserttheotherendofthebulbibntotheothersocket.

 Makesurethebulbislocatedcentrallyinbothsockets.

4. Swingthecoverupbackintoitsoriginalpositionandsecure

 usingscrew.

Summary of Contents

Page 1 - Installation Instructions

Fig. 1Wiring Box (cover removal)Fig. 2Wiring Box (cover removed)To LampYellow/GreenBlueBrownWiring partially erased exposing raised lettering at bott

Related models: NCFB150C

Comments to this Manuals

No comments

Timeguard NCFW150C User Manual

Browse online or download User Manual for Clock Timeguard NCFW150C. Timeguard NCFW150C User Manual

Summary of Contents

Related models: NCFB150C

Comments to this Manuals

Related products and manuals for Clock Timeguard NCFW150C