Timeguard TG77 User Manual download pdf (Page 9)

Press → to set minutes to 10

Press SET, display shows:

Press → to set seconds to 30

Press SET, display shows:

Now press CTD to start the countdown procedure. Output light will

turn ON and the appliance plugged into the TG77 will be energised

while the display counts down to zero when the appliance will be

turned OFF. Before pressing CTD ensure the TG77 is plugged into a

live socket and the appliance is switched ON. If the CTD button is not

pressed within 10 seconds of the previous use of the SET button the

display will revert to normal operation mode. To retrieve the setting

press ← and then SET after which countdown can be started by

pressing the CTD button.

11. Operating the TG77 in Timed

ON/OFF Mode

Ensure that the unit is in operating mode. Press the button until

the left side of the display shows AUTO and either ON or OFF as

appropriate for the programme(s) at that time of day and day of

week. Then plug the TG77 into a live socket, plug the appliance to be

controlled into the TG77 and ensure the appliance is switched ON.

The TG77 will enact all programmes stored on a continuous basis.

To override the unit at any time press the button twice. The

display will change from AUTO OFF to AUTO ON or from AUTO ON

to AUTO OFF and the override will last until the next programme

change.

To go to a continuous ON or continuous OFF condition press the

button repeatedly until either ON or OFF as appropriate is on the

display without the AUTO symbol.

1 2 3 4 5 6 7 8 9 10 11 12

Gérard 30 May 2024 | 07:57:26

Bien

Timeguard TG77 User Manual Page 9